The automatic packaging machine may encounter some fail […]
The automatic packaging machine may encounter some failures during use, such as why the startup does not work, etc. What are the reasons for these problems and how to solve them?
What is the reason for the automatic packaging machine not running?
Problem 1: The cutter does not move after startup
1. Enter the running mode and check whether the cutter is disabled.
2. Check whether the cutter start time and cutter time are set correctly.
3. After the horizontal seal is closed, check whether the sensor on the cylinder has a signal.
4. Check whether the solenoid valve (including coil and circuit) and cylinder are damaged.
Problem 2: The turntable of the automatic packaging machine does not move, and the contactor is closed
1. Whether the mechanical part is stuck.
2. Check whether the three-phase power supply is normal.
3. Whether the contactor contacts are damaged; whether the three-phase solid state is damaged.
Problem 3: No response to automatic packaging machine operation
1. Check whether the touch screen communicates with the PLC;
2. Check whether the PLC works normally;
3. Check whether the emergency stop switch is pressed;
4. Check whether the packing machine is turned on. If it is turned on, the KM5 contactor in the control cabinet of the packing machine is damaged.
Our goal is to provide you with the perfect packaging machine solution, support customization, and explain to our company the situation of packaging materials, packaging equipment (bag size, material), etc., expected output, etc., in order to provide you with suitable models. . If there are any other technical requirements, we will try our best to solve them.
TEL:0086 18069669221 EMAIL:shigan7@checkweigher-sg.com
Copyright © Shanghai Shigan Industrial Co., Ltd. All Rights Reserved. XML
Company's main business: Vertical packaging machine,Premade Bag Packaging Machine,Multi-head Weigher,Linear Scale,Powder screw packaging machine,Dynamic Checkweigher,Metal Detector,Weighing Labeling machine,